Vacuum Workbenches
Mechanical handling without re-clamping the workpiece
- Swivelling the workpiece 90° left and right, manual locking in 45° increments
- Foot pedal for swivelling and releasing the workpiece
- Pneumatic or electrical vacuum generation, with energy saving regulation (optional)
- Sensing valve activates vacuum after the workpiece is in position, unused suction plates remain closed
- Voltage AC 230 V with electrical vacuum generation
- Dimensions of workbench: Length: 1,240 mm, Width: 490 mm, Height: 670 mm to 1,020 mm (infinitely adjustable)
Vacuum workbench with two suction plates and ejector SEG
Vacuum workbench with four suction plates and ejector SEG
Vacuum workbench with two suction plates and vacuum pump EVE
With extension for large workpieces
| Type | Suction Plates | Suction Plate Type (mm) | Vacuum Generation | Operating Pressure (bar) | Max Lift Capacity (kg) | Weight (kg) | Part No. |
|---|---|---|---|---|---|---|---|
| PVT-2-SPL-300x100-VE SEG-4 | 2 | SPL 300x100 | Ejector SEG | 5 | 90 | 47 | 13.02.01.10125 |
| PVT-4-SPL-300x100-VE SEG-4 | 4 | SPL 300x100 | Ejector SEG | 5 | 180 | 52 | 13.02.01.10170 |
| PVT-2-SPL-300x100-VER EVE-4 | 2 | SPL 300x100 | Pump EVE | - | 90 | 55 | 13.02.01.10553 |
VACUUM REVERSING TABLE VWT 180°
- Processing large format panel material on the top and bottom without re-clamping the workpiece
- Unhandy workpieces can be turned by 180°; workpieces are turned continuously within ten seconds
- All controls integrated in operating stand
- Safe operation thanks to acoustic warning device and large vacuum reservoir
- It is only possible to release the workpiece once it has reached the end position
- Voltage: AC 400 V
- Max. workpiece size: Length: 3,000 mm, Width: 2,000 mm, Height: 50 mm